5in x 5in tray made from live edge olive wood with resin infill. The grain in the olive wood comes out beautifully.
Resin/Olive Tray
Dungeons & Dragons Game Set
Wood case designed especially for the DnD enthusiast. Keeps a complete set of dice including a D2 plus room for extras. Case bottom has a slot for use as a phone stand and the lid is a nice dice rolling area. The D2 area can also be used to hold a miniature. Tracking sheets allow you to keep track of critical player stats. The case is 5″x5.5″x1.5″. Various wood species are available. Customization is possible as well.
Butterfly Clock
Laser cut pastel acrylics on a wood base. The wood base was carved on my CNC router from a scrap pine shelf piece.
Live Edge Cribbage Boards
Standard three handed 121 point cribbage boards made from live edge hardwoods. With inset magnet lid clasp peg storage. I received a number of charcuterie board ‘seconds’ as payment for another job I did. While maybe not up to standard for a charcuterie board, they make beautiful cribbage boards. The holes and peg storage were CNC milled. The peg storage lid was laser cut from 1/8in acrylic.
Dice Vault – Rectangular
Three examples of a rectangular dice vault or pen case, or… Two are made from padauk wood and one from spectraply – “May Flowers”. All have magnetic clasp enclosures. The first padauk version in the pictures below has more rounded corners and the lid fits snugly into the bottom part. The other two have lids that slide open to break the magnetic attachment. Padauk is a beautiful wood – both to work with and in the finished product. It is slightly brittle so one has to be careful with edges and very small details. The spectraply is interesting – this is my first time using it. At $33 per 2″x2″x12″ block it is a bit pricey but the resulting product can be spectacular.
I can custom make these boxes from many species of wood and can custom laser engrave to your specifications. Designed in VCarve Pro and rendered on an X-Carve CNC router. The leather lining and foam inserts are laser cut.
Coin Holder v2
Another design for a Coin Holder for display of military unit and operations coins. This coin holder will hold about 30 of the standard 1.75″ coins.
From live edge domestic pear. CNC routed slots. Laser etched Canadian Armed Forces badge. Finished with Tried and True original wood finish. Approximately 11in x 5in.
This one I made for a currently serving CAF friend.
Coin Holder
Coin Holder for desk/shelf display of military unit and operations coins – these coins are also referred to as challenge coins. This coin holder will hold about 25 of the standard 1.75″ coins.
From live edge ash wood. CNC routed slots. Finished with Tried and True original wood finish. Approximately 10in x 5in.
I have a couple of finished units available for sale for $50 each.
Charcuterie Board
Live edge Olive wood with CNC routed handle and laser etched customization.
Finished with food safe Hipbee Cutting Board Wax.
Quilt Clock
This project was created for a quilting enthusiast friend. The beech wood base was designed using VCarve Desktop and carved out on an X-Carve CNC router. The clock face was designed in Lightburn and laser cut from coloured 1/8″ acrylic.
Dice Vault
Hexagonal three piece dice vault. The bottom and top are CNC routed from olive wood and have rare earth magnetic clasps. Laser cut leather and felt line the interior. The wood parts fit into an engraved leather dice arena.
